Fructose 30-70 mesh crystals

    SPECIFICATIONS

    AssayFructose: 99 - 101%
    Fructose (HPLC): Min 99.5%
    ColourPass test
    AcidityPass test
    Calcium (Ca)
    (% Magnesium)
    Max 50 ppm
    Chloride (Cl)Max 180 ppm
    BariumPass test
    Heavy metalsMax 1 ppm
    CadmiumMax 0.5 ppm
    ArsenicMax 1 ppm
    Loss on drying
    (70°C Vacuum Oven)
    Max 0.15 %
    LeadMax 0.5 ppm
    Absorbance
    (HMF)
    Pass test
    Specific Optical Rotation-91 to -93
    Residue on ignitionMax 0.1 %
    Mesh SizeUS Standard: 030, Microns: 600, % Retained: 6.6, Cumulative: 6.6, LSL: 0, USL: 15
    US Standard: 070, Microns: 212, % Retained: 93%, Cumulative: 99.6%, LSL: 0, USL: 15
    Pan, % Retained: 0.4, Cumulative: 100, LSL: 0, USL: 15
    Sugar
    (Foreign)
    Pass test
    MercuryMax 0.1 ppm
    Iron (Fe)Max 5 ppm
    SulphateMax 200 ppm
    Shelf life2 years


    Direct Food Ingredients will ensure that any material supplied this specification will confirm to the above physical and chemical properties. However, we have no control over the use of the material and can accept no responsibility for problems caused by the customer's failure to ensure the material supplied is suitable for the intended use.

    This specification has been last modified on Fri 8 June 2012 (1135)

Receive this spec by email

Receive this specification by email in PDF: