Sorbitol Powder DC

    DESCRIPTION

    Purified white crystalline powder of sorbitol with a fine granulometry.

    AppearancePowder
    Appearance of solutionPasses test
    ApplicationsRecommended for direct compression in sugar free tablets (comprimates) giving a very hard texture at low compression force and for sugar free chewing gum.
    CN Code2905 44 91
    CAS No.50-70-4
    EINECS No.2000615
    E numberE420(i)
    Raw MaterialCorn (Maize)
    FunctionalityExcellent compresibility, good flowability,moderate relative sweetness, pronounced cooling effect,reduced calorie (2.4Kcal/g), non-cariogenic, suitable for diabetics, compatible with most active ingredients, excellent workability on high speed tableting machines, rapisly soluble in water.

    SPECIFICATIONS

    Assay
    (on dried basis)
    (EP) 97 to 102%
    (USP) 91 to 100.5%
    Moisture
    (@50°C)
    Max 1 %
    IdentificationPasses test
    ConductivityMax 20 μS/cm
    WaterMax 1.5 %
    Impurities
    (Iditol, Maltitol, Mannitol)
    Max 2 % on dried basis
    pH3.5 to 7
    Melting point98 to 104°C
    Residual solventsPasses test
    LeadMax 0.5 ppm
    Specific Optical Rotation+4 to +7°
    Residue on ignitionMax 0.1 %
    Sugar
    (Red sugars)
    (EP) Max 0.2%
    (USP) Max 0.3%
    Total SugarsTypically 0.3%
    Nickel(EP) Max 1ppm
    (USP) Max 1μg/g
    GranulometryMax 63μm : Max 7.5%
    Min 250μm : 20 to 45%
    Min 500μm : Max 0.5%
    Mannitol
    (on dried basis)
    Typically 0.7%
    Related Products
    (On dried basis)
    Related products: Passes test
    Related products any: Max 2%
    Related products, disregard limit: 0.1%
    Related products, Total: Max 3%
    StorageStore inside under dry conditions
    PackagingDrums, Big bags, Paper bags, Bulk
    Shelf life12 months from date of production

    MICROBIOLOGICAL

    Aerobic Plate CountMax 1000 /g
    Yeasts
    (Combined yeasts and moulds count)
    Max 100 /g
    SalmonellaAbsent /10g
    Escherichia ColiAbsent/g


    Direct Food Ingredients will ensure that any material supplied this specification will confirm to the above physical and chemical properties. However, we have no control over the use of the material and can accept no responsibility for problems caused by the customer's failure to ensure the material supplied is suitable for the intended use.

    This specification has been last modified on Tue 17 January 2012 (936)

    Product also known as : 50-70-4 2000615 E420(i)

Receive this spec by email

Receive this specification by email in PDF: