Copper Sulphate Pentahydrate

    DESCRIPTION

    Blue crystals, screened through a 28 mesh, free-flowing and dustless. A slight loss of combined crystal water results in a high copper content. Highly dried and free from silica anti caking agents. Recommended for industrial application where fast dissolving is required. This product is suitable for use as a feed ingredient. If this is the intended use specific extra information is attached.


    SPECIFICATIONS

    Moisture
    (Free)
    Nil
    CadmiumMax 1 ppm
    ArsenicMax 2 ppm
    LeadMax 30 ppm
    Mesh Size
    (Distribution)
    Greater than 0.6mm: 0-3%
    Less than 0.045mm: 0-3%
    Matter Insoluble in WaterMax 0.2 %
    Acid Value
    (Free)
    Nil
    ZincMax 180 ppm
    Mercury
    (Not detected)
    Max 0.1 ppm
    NickelMax 40 ppm
    Iron (Fe)Max 300 ppm
    CopperCopper: Min 25.5%
    Copper Sulphate Pentahydrate: Min 99.5%
    PackagingPolythene lined woven polypropylene sacks.
    25kg or 1MT bulk bags on pallets of 1MT.


    Direct Food Ingredients will ensure that any material supplied this specification will confirm to the above physical and chemical properties. However, we have no control over the use of the material and can accept no responsibility for problems caused by the customer's failure to ensure the material supplied is suitable for the intended use.

    This specification has been last modified on Fri 6 July 2012 (1160)

    Product also known as : F crystal

Receive this spec by email

Receive this specification by email in PDF: