Disodium Phosphate Dihydrate

    SPECIFICATIONS

    AssayMin 98 %
    Identification
    (Tests)
    Pass test
    Bulk Density900 to 1100g/l
    pH
    (1%)
    9 to 9.4
    FluorideMax 3 ppm
    Heavy metals
    (as Pb)
    Max 10 ppm
    CadmiumMax 1 ppm
    ArsenicMax 1 ppm
    Loss on drying
    (105°C)
    18 to 21%
    LeadMax 1 ppm
    Insoluble
    (H2O-insoluble substances)
    Max 0.1 %
    Mesh SizeMin 0.850 mm (U.S.S. 20): 5 to 15%
    MercuryMax 1 ppm
    P2O5 (as anhydrous)39.1 to 41.1%
    Sodium Oxide34.1 to 35.8%
    Shelf life3 years


    Direct Food Ingredients will ensure that any material supplied this specification will confirm to the above physical and chemical properties. However, we have no control over the use of the material and can accept no responsibility for problems caused by the customer's failure to ensure the material supplied is suitable for the intended use.

    This specification has been last modified on Fri 24 August 2012 (1253)

Receive this spec by email

Receive this specification by email in PDF: